Hotels & hospitality
Guest bathrooms where baths and shower trays are used by people unfamiliar with the room, often several times a day.
Commercial & domestic service
Anti-slip Treatments for Baths & Shower Trays
Professionally applied treatment that can improve slip resistance on suitable baths and shower trays, carried out in place in hotels, care environments, managed property and homes — subject to assessment and correct maintenance.
Where it matters most
Commercial value for hospitality, care and managed property
Wet bathing areas are one of the most predictable slip risks in an occupied building. Treating suitable baths and shower trays is a practical, low-disruption measure that sits alongside your existing risk assessment, cleaning and maintenance regime rather than replacing any part of it.
Care & supported living
Environments where residents may be less steady on their feet and bathing areas are used with assistance.
Student & managed accommodation
High-turnover bathrooms across blocks and portfolios, treated room by room around occupancy.
Managed commercial property
Serviced apartments, staff facilities and let property where practical risk management is part of planned maintenance.
In the home
Suitable domestic use
- Family bathrooms used by young children
- Homes where an older or less mobile person bathes independently
- Baths and trays that feel slippery when wet or when products are used
- Holiday lets and second homes prepared for guests
Suitability
Where treatment may be appropriate
- Acrylic and enamel baths in sound condition
- Suitable shower trays and step-in bases
- Bathing areas that can be taken out of use while treatment cures
- Surfaces that will be cleaned with non-abrasive products afterwards
How the work is carried out
Assess, prepare, apply, cure, hand over
- 01
Assess
We check the material, condition and finish of the bath or tray and confirm whether treatment is suitable. Where it is not, we say so.
- 02
Prepare
The surface is thoroughly cleaned and prepared, and the surrounding area, fittings and floor are masked and protected.
- 03
Apply
The treatment is applied evenly and under control across the walking and standing area of the bath or tray.
- 04
Cure
The treated surface is left to cure for the required period. The bathing area must not be used until we confirm it is ready.
- 05
Hand over & aftercare
We hand the area back and explain cleaning and maintenance so the treated surface continues to perform as intended.
What it can do
Benefits, described honestly
- Can improve slip resistance on suitable baths and shower trays
- Supports practical risk management as part of planned maintenance
- May help reduce exposure to avoidable slip incidents and associated claims
- Applied in place, with no strip-out and no replacement cost
- Discreet finish that keeps the existing bathroom in use
Important
Suitability and limitations
- Suitability is assessed for every bath and tray; some surfaces and conditions are not suitable.
- Treatment does not prevent accidents and does not remove the need for care when a surface is wet.
- It does not replace formal risk assessment, cleaning schedules or maintenance obligations, and it does not transfer or eliminate liability.
- Performance depends on correct cleaning with non-abrasive products and on the surface being maintained.
- We do not quote product performance ratings or certification figures. Where a specification requires them, ask us and we will confirm what documentation is available.
Where treatment is considered
Anti-slip treatment is applied to the standing area of suitable baths and shower trays, most often in guest bathrooms, care and supported living settings, student accommodation and adapted domestic bathrooms where someone is less steady on their feet.
It is one practical measure among several, alongside grab rails, matting, cleaning regimes and risk assessment. We do not present it as a solution to slip risk, and we do not quote performance ratings or certification figures we have not been asked to supply.
- Acrylic and suitable coated baths in guest and domestic bathrooms
- Shower trays where the surface is sound and properly supported
- Care, supported living and adapted bathrooms
- Room-by-room programmes across hotels and managed accommodation
Assessment and on-site work
The surface is assessed first for material, condition and finish. Worn, damaged or previously coated surfaces may need repair before treatment, and some surfaces are not suitable at all — we say which at assessment rather than at the end of the visit.
Treatment is applied to a cleaned, prepared standing area and then needs to cure before use. Because that curing period takes a room out of service, we confirm timings when quoting so bathrooms can be planned around it.
Treatment, repair or replacement
Treatment suits a bath or tray that is otherwise sound and is going to stay in place, and it can be programmed across many rooms without replacing fittings or losing days per bathroom.
Where a surface is heavily worn, damaged or failing, repair or replacement comes first — applying a treatment to a poor surface produces a poor and short-lived result.
Before you enquire
Information that helps us quote
For single bathrooms we need to see the surface; for portfolios we mainly need volumes and access.
- A photograph of the bath or tray base taken from above
- A close-up of any wear, damage or previous coating
- The material of the bath or tray, if you know it
- The number of rooms or units to be treated
- How long each room can realistically be out of use
Also known as
How customers describe this work
- anti-slip coating
- slippery bath
- slippery floor
- safety treatment
This is the service people search for as an anti-slip coating: treatment for a slippery bath or shower tray at home, or a slippery floor in a bathroom, kitchen, changing area or communal space on a commercial site.
Suitability depends on the surface material, its condition and how the area is used and cleaned, so each area is assessed before treatment. Anti-slip treatment improves slip resistance; it does not make any wet surface risk-free, and it is not a substitute for matting, signage or cleaning routines.
Questions
Anti-slip treatment FAQs
- How long does treatment take?
- A single bath or shower tray is usually a short visit, but the surface then needs to cure. We confirm timings when quoting so rooms can be planned out of use.
- Can it be applied to any bath or shower tray?
- No. We assess the material, condition and finish first. Damaged or heavily worn surfaces may need repair first, and some surfaces are not suitable at all.
- Does it change how the bath looks?
- The aim is a discreet finish across the standing area. We will explain the expected appearance before starting so there are no surprises.
- How should treated surfaces be cleaned?
- With non-abrasive cleaning products and no scouring pads or harsh scrubbing. We provide aftercare guidance at handover.
- Does treatment mean a bathroom is safe?
- No. It is one practical measure that can improve slip resistance on a suitable surface. Risk assessment, signage where appropriate, cleaning and maintenance remain the responsibility of the property owner or operator.
- Can you treat a whole portfolio?
- Yes. We can programme treatment across multiple rooms, blocks or sites, scheduled around occupancy. Tell us the number of rooms and the locations when you enquire.
- How should a treated surface be cleaned?
- With non-abrasive products and no scouring pads or harsh scrubbing. Abrasive cleaning is the fastest way to shorten the life of a treated area, and we provide surface-specific aftercare guidance at handover.
- Can treatment be programmed across a hotel or care portfolio?
- Yes. Rooms can be treated in sequence around occupancy so the building keeps operating. Tell us the number of rooms, the locations and any curing constraints when you enquire.
Coverage
Where we cover
We are based in Bolton and work across Greater Manchester and the North West, with wider coverage available for commercial work.
Helpful next steps
Useful reading before you enquire
- See genuine completed repairsBefore and after photographs of real Surface Magic work, not stock imagery.
- Aftercare for a professional repairHow to clean and use a repaired surface so the finish lasts.
- Commercial sectors we supportHow this work is scheduled around trading hours, guests, residents and staff.
Why Replace When You Can Repair?
Ask us about anti-slip treatment for your baths and shower trays
Tell us how many rooms are involved, the type of bath or tray and the location, and send photographs if you can. We will confirm suitability and quote for the work.